Alloy nickel Monel 401 pipe supplier, monel 401 in stock, produce monel 401

Monel 401 (UNS N04401 / W.Nr. 2.0842) is used primarily in specialized electrical and electronic applications. Monel 401 is readily autogenously welded by the gas-tungsten-arc process. Resistance welding is a very satisfactory method for joining the material. It also exhibits good brazing characteristics.

Products Details

▪ Electronic and electrical devices ▪ Marine fixtures ▪ Chemical processing equipment ▪ Gasoline tanks ▪ Boiler feed water heaters ▪ Heat exchangers
Density, g/cm3 Melting Point, ℃ Tensile Strength, MPa Yield Strength, MPa ELongation, % Hardness, HRB
8.91 1280-1300 480 250 30 /
Alloy C Si Mn P S Ni Cu Fe
Monel 401 ≤0.10 ≤0.25 ≤2.25 ≤0.020 ≤0.015 40.0-45.0 Bal ≤0.75
Trademark GB GOST ASTM UNS DIN W.Nr. NF BS
Monel 401Cuprothal 49 MWS-294 Constantan CuNi44NC050 МНМц43-0.5Копель Monel 401Alloy 294 N04401C72150 CuNi44Mn1 2.0842
Rod, Bar, Wire and Forgings ASTM B164/ASME SB164, DIN 17752-17754
Plate, Sheet and Strip ASTM B127/ASME SB127, DIN 17750
Pipe and Tube ASTM B163/ASME SB163, ASTM B725/ASME SB725, ASTM B775/ASME SB775, ASTM B751/ASME SB751, DIN17751
Welding Product
Others ASTM B366/ASME SB366(Fittings), DIN 17743
Monel 401 available sizes and specifications
Grade Monel 401
Nickel plate Thickness: 0.3mm - 150.0mm Width: 1000mm - 3000mm
Nickel strip/ nickel foil Thickness: 0.02mm - 16.0mm Width: 5mm - 3000mm
Nickel coil Thickness: 0.3mm - 16.0mm Width: 1000mm - 3000mm
Nickel pipe Outside diameter: 6mm - 1219mm Thickness: 0.5mm - 100mm
Nickel Capillary Pipe Outside diameter: 0.5mm - 6.0mm Thickness: 0.05mm - 2.0mm
Nickel bar Diameter: Ф4mm - Ф600mm
Nickel wire rod Diameter:Ф0.01mm - Ф6mm

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours