Nimonic 901 alloy bar, nickel alloy 901 tube, incoloy alloy 901 sheet supplier

Nimonic 901 (UNS N09901 / W.Nr. 2.4662) is an age-hardenable Ni-Fe-Cr superalloy with significant additions of molybdenum, titanium and aluminum. The alloying route for this high performance material may include combinations of vacuum induction melting, vacuum arc remelting and electroslag remelting, according to the final application and the customer’s specification. Typically, the alloy is used for gas turbine engine discs, shafts, rings, casings and seals with a maximum service temperature of around 600°C (1100°F).

Products Details

Nimonic 901 is commonly used for gas turbine engine discs, shafts, rings, casings and seals.Nimonic 901 has high yield strength and creep resistance at temperatures to about 1110°F (600℃). As Alloy 901 has a substantial iron content it enables alloy 901 to combine strength with good forging characteristics.
Alloy C Si Mn P S Cr Ni Co Mo Al Ti Cu Fe
Nimonic 901 ≤0.10 ≤0.40 ≤0.50 ≤0.030 ≤0.030 11.0-14.0 40.0-45.0 ≤1.00 5.0-6.5 ≤0.35 2.8-3.1 ≤0.50 Bal
Density, g/cm3 Melting Point, ℃ Tensile Strength, MPa Yield Strength, MPa ELongation, % Hardness, HRB
8.14 1280-1345 ≥1034 ≥689 ≥12 /
UNS W. Nr Trademark GB DIN NF
N09901 2.4662 2.4975 Incoloy alloy 901 Nimonic 901 GH2901 NiFeCr12Mo Z8NCDT42
Rod, Bar, Wire and Forgings AMS 5660, ISO 9723, ISO 9725
Plate, Sheet and Strip
Pipe and Tube
Welding Product
Nimonic 901 available sizes and specifications
Grade Nimonic 901
Nickel plate Thickness: 0.3mm - 150.0mm Width: 1000mm - 3000mm
Nickel strip/ nickel foil Thickness: 0.02mm - 16.0mm Width: 5mm - 3000mm
Nickel coil Thickness: 0.3mm - 16.0mm Width: 1000mm - 3000mm
Nickel pipe Outside diameter: 6mm - 1219mm Thickness: 0.5mm - 100mm
Nickel Capillary Pipe Outside diameter: 0.5mm - 6.0mm Thickness: 0.05mm - 2.0mm
Nickel bar Diameter: Ф4mm - Ф600mm
Nickel wire rod Diameter:Ф0.01mm - Ф6mm

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours